8 of these stainless steel hardware sets are used to mount the H-bracket to the aluminum frame on the backboard. 4 are used on the top and 4 are used on the bottom securing it in the center of the backboard.
Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnkhoops.com/support.
-  3 1/2cm x 8mm hex bolt with a 13mm socket head
-  8mm small washer
-  8mm large washer
-  8mm lock washer
-  8mm hex nut with a 13mm socket head